myPS2 works w/ ULaunchElf but not DMS HDD Explorer

[jrbilodeau]

I've tried to find a solution for a problem that im having but cant seem to find one. im using a matrix infinity firmware 1.91 with dms hdd explorer in dev 2 mod as my app loader. im not sure if this applies the same way as trying to load myPS2 in dev2 because dsm hdd explorer installs to hdd0:/__boot and then my myPS2 folder gets installed inside that partition making it hdd0:/__boot/MYPS2/MYPS2.ELF

i get "Loading GUI String Table...FAILED" when trying to load it from DMS HDD Explorer, but i'm able to load myPS2 my loading uLaunchelf. what i've noticed is that if i run it off uLaunchelf SetElfPath = host: but if i load it from dms hdd explorer SetElfPath = hdd0: and doesn't see my config file.

scr_adjust_x = 0
scr_adjust_y = 0
scr_mode = 255
scr_screenshot = 1
scr_path = host:/
tbn_caching = 1
tbn_cache_path = pfs0:/THUMBCACHE/
net_enable = 1
net_ip = 192.168.0.120
net_netmask = 255.255.255.0
net_gateway = 192.168.0.1
net_dns = 192.168.0.1
net_smb_workgroup = MSHOME
net_smb_debug = 0
ftp_enable = 1
ftp_port = 21
ftp_anonymous = 1
ftp_login = myPS2
ftp_password = myPS2
radio_cache_list = 1
part_mount_list = hdd0:+SNES
lang_file = english.xml
lang_charset = ISO-8859-1
skin_name = default
time_timezone = 60
time_dst = 0
hdd_boot_part = hdd0:__boot
hdd_boot_path = /MYPS2/

[bootsector]

Check it out:

http://www.youtube.com/watch?v=cjgKD68OBRw

I have attached the tool you will need!

Just put "hdd0:/__boot/MYPS2/MYPS2.ELF" (without quotes) and press the "Gerar Launcher" button. You will get a SL.ELF which is a "loader" for your MYPS2!

Now just make DMS HDD Explorer call SL.ELF instead of MYPS2.ELF directly. If you need a good tool for modifying DMS HDD Explorer applications list (APPLIST.DAT), you could try:

http://www.brunofreitas.com/portal/f...ditor_enUS.jar

You will need Java Runtime Environment 5.0 from http://java.sun.com to get these applications running!

Good luck!

Best regards,

bootsector