modbo 1.1 problems

anja7075 · #1 08-22-2005, 11:04 PM

I have installed a modbo 1.1.it plays ps2cd backups it plays ps2dvd originals but non dvd backups.I have upgraded it to v1.39 and downgraded it to V1.36 but i have the same problem.I would be more than greatful of any help.

anja7075 · #2 08-22-2005, 11:11 PM

i also used the 2 resisitor fix 5,6 and 4,7

#3 08-23-2005, 01:28 AM

Uhm, 560 ohms resistor and 4.7k resistor right? Not 5.6k. If it's not booting backups then you should check the bios pins and vias.

SlinkyDink · #4 08-23-2005, 04:44 AM

sounds like the laser is worn out. what model is your ps2?
If its a V12, try removing the resistor fix and see if it fixes the problem.

#5 08-23-2005, 07:07 AM

How could the laser be worn already if it's a v12 =/

villasg · #6 08-23-2005, 07:58 AM

Need to connect the H point

anja7075 · #7 08-24-2005, 09:57 PM

its v12 and my mistake the resistors are correct. I am going to open it up again and check point H and the bios vias thanks. I will let you know how i get on tomorrow