please help with hdl dump

**davbere** · 10-01-2004,05:12 PM

hello. im trying to install lord bogami's gui for hdl dump. i have a chip so booting is not a problem. i also have a wireless linsksys router. it shows my ps2 as 192.168.1.225 255.255.255.0 192.168.1.1 i created the ipconfig and burned it[along with the hdld_svr elf] it loads up fine [on my ps2 ] but it shows my ip address as 192.168.0.10 and there are a couple of lines below my ip address [i dont know what they say because they are hard to read ]that show 0. the problem im having is when i start up the gui and click connect nothing i have on the hard drive shows on the screen. in the bottom right hand corner it says read toc,and stays like that, so i dont think its connecting. could somone please tell me what i may be doing wrong? thankyou. david and thanks to you lord bogami and to all you that develop these cool apps.

**Phreaker47** · 10-01-2004,07:20 PM

hdldump server will NOT load the IPCONFIG.DAT file from the CD. It must be placed on the memory card at mc0:/SYS-CONF/

Use ExecFTPs or PS2Menu or whatever to copy it there.

**davbere** · 10-01-2004,07:35 PM

o.k. phreaker i have a matrix infinity chip could you tell me what the install script should say? this is what my install.cnf says [the one i already made] HDLD_SVR
mc0:\BOOT\HDLD_SVR\HDLD_SVR.ELF
MD mc0:\BOOT\HDLD_SVR
CP cdrom0:\HDLD_SVR.ELF;1 mc0:\BOOT\HDLD_SVR\HDLD_SVR.ELF
CP cdrom0:\IPCONFIG.DAT;1 mc0:\BOOT\HDLD_SVR\IPCONFIG.DAT

**Phreaker47** · 10-01-2004,07:47 PM

Forget install scripts. I have a DMS and I don't use them anymore. Do you have PS2Link on a CD? (PS2Link does load IPCONFIG.DAT from the CD, by the way) Once you have that working and connected with Inlink on the PC side you are all set to go from there. Send and run ExecFTPs server through Inlink (it will recognize you are running it through Inlink and therefore an IPCONFIG file isn't necessary.) Start up your favorite FTP program, preferably FlashFXP and connect to your PS2s IP. Now you are all set to create directories on your MC (or even HDD) and start copying programs over. Here is where you would create the folder SYS-CONF on mc0, and then copy IPCONFIG.DAT to it.

I know it sounds like a lot of steps, but once you are set up it gets a lot easier and you won't waste any more CDRs.

I'm not up on how your chip works but I'm assuming it has a DEV mode? For DMS3, dev mode looks for mc0:/boot/boot.elf at startup. So in my case, I started clean and created the boot directory through execftps/flashfxp, then copied LaunchELF 3.11 as boot.elf to that folder. Then I started copying all the other apps over that I wanted. Now when I boot my machine in DEV1, LaunchELF comes up. From there I was able to configure all my other apps to the keys.

**davbere** · 10-01-2004,08:18 PM

PHREAKER HOW DO I CONNECTwith inlink on the p.c. side? i found the download for ps2 link but not for inlink. could you tell me where i can find it? EDIT nevermind i found it. i installed ps2 link [with ip config] and inlink when i run inlink i get a incapture.dll error runtime error 53 file not found. what should i do now? one more thing on the ps2 end it stops at " could not load modulecdrom0:\IOMANX.irx 4294967093. " if you could help i would be very grateful. david

**LordBoGaMi** · 10-02-2004,08:16 AM

deybere - i build an image for you.
I send you an PM today.

**davbere** · 10-02-2004,08:23 AM

lord bogami thankyou. i feel honored.

**LordBoGaMi** · 10-02-2004,12:46 PM

Originally Posted by davbere

lord bogami thankyou. i feel honored.

Hi,

here is your Image.
IP PS2: 192.168.1.254

Good Luck.

**davbere** · 10-02-2004,07:22 PM

thankyou lord bogami. i will look over it to see what tit is that i was doing wrong. many thanks for all your efforts. david.

**davbere** · 10-03-2004,05:47 AM

to anyone that could answer my questions. i am trying to get hdldump [with lord bogamis gui] to work on my setup. i have tried running it off mc and off a cd. are there anymore programs or pieces i am missing? such as a ftp program? i havea linksys wireless router with a linksys wireless game adapter. do i need to configure it some special way? do programs such as hdl download upload via internet or via local network? any help or insights would be appreciated. also i wanted to add that i am running the router in gateway mode. could this be a problem?

User Tag List

Thread: please help with hdl dump

Tweet

LinkBack

Thread Tools

Display


	Would you like to get all the new info from PSX-Scene in your email each day? Subscribe to our Daily Digest! Want to learn more about the team keeping you up to date with the latest scene news? Read about them now! Check out our Developer bios, too!