hey guyz really need some help.....

ok first off i have a dms4lite in a v13

before i had the hdconnect i soldered the wires to the board...

when i used hdloader or dms format tool i got errors after formating "no partions found fatal error" and so on

NOW after i installed the hdconnect (what a total nightmare) 2 of the surface mounted caps came off the board.....

this would be pins 21 and 31 i dont know if they are caps.... i assume they are as i tested with a meter and i got nothing off either side

i bridged little wires to the board so they are still connected....


sounds stupid to as but is this the reason it doesnt work? and can anyone help with the value of these so i can put new ones in