ExecFTPs 0.69 problem
My ExecFTPs hangs up....
- I have edit the Config.dat
- I have make a Image of ExecFTPs
- I load the ExecFTPs on my PS2 HDD via PC
- I start ExecFTPs
- He loads the modules and the iomanx
- Then he hang (look at the attachment)
How can i fix that?
- I have a PAL PS2 v7 with HDAdvance and a Seagate ST380011A 80 GB 7200/rpm
I have a picture found on the lookatthemonkey webpage. Look at that... after he loads ps2hdd he hang up and nothing go on
how long did you wait? i know it takes a while to load up all the modules so maybe you need to wait longer. it could be your CDR image is too small so there can be problems. try putting a dummy file in there to see if it can help out any.
I have use the version where i put the execftp image from pc to the ps2 hdd and load the image with my had advance retail version... i wait now... 10 minutes i think
and i have put a dummy in
Doesnt work.... oh man i think i get a chip....^^
before chipping your ps2, you might try taking a look at the system.cnf. Under mode, it's originally NTSC/PAL, but you can change that word to only NTSC or only PAL, depending on your system. It made execftps work for my PS2.
hmm dont work what for a version from execftps u use??
So. its very funny.... evrything works... my keylauncher starts... but when i wont to start any program like cogswap, execftps or ps2menu he say ERROR: The load of thise program has failed
i have this exact problem.
only thing was it was working yesterday ...off the HDD, now all of a sudden ...doesn' work. and i'm having probs using LordBoGaMi_HDLD_GUI_1.1 now too ..as it wont connect ... :(
even when i boot using the same CDR i orig loaded the svr file with...
hmm it works..... with my ps2 now... but the only problem i have is that i cant connect on my ps2.... hmm i think it is better with a cross over cable or not?