another Execftp tread

[gorzerk]

hi
sorry guy, I know how works FTPs but ftp through Ps2/pc, is annoying me hardly. I have 192.168.0.10/255.255.255.0 & gateway 192.168.0.1 on ps2 ok
waiting to get stuffed on port 21. then when I connect my pc using flashfxp (no passive mode) it does not find the server.
the ip adress of my pc is forced to 192.168.0.1 to be the gateway, but I can't ping 192.168.0.10 and cannot connect.
I then put myself on dhcp to see if my pc get an ip on the 192.xxx range, but it display 169. (bad network range)

the cable used is this one I use to connect my pc and my mobile pc. the ftp config is this one mentioned before, and my pc have been forced on the good range and on dhcp , both returning me error when trying to connect.

thanks million time to provide any ideas.
best regards,
GorZerK

[Phreaker47]

There's no DHCP server to be found in your case so that's not going to do anything.

If the PS2 and PC are connected directly together, then you must use a crossover cable and not a patch cable.

[gorzerk]

Hi
As i told I use a crossover cable as it is what I use for connecting 2 PCs at home.
I tryed that dhcp stuff, but I easily understood that it could not resolve.

I still don't understand why I can't ping the ps2 or connect to port 21

[ltdc2004]

have you checked your firewall settings?