UFO type PS2 LEDs install +tutorial

[Kcc]

this is how the ps2 looks like in the night time and day time when the lights are on, i used 6x5mm 5V LED's and one 600ohm Resistor, these are connected in parallel mode.

working samples:




here are the tutorial, the PSU on the PS2 is from a V8 machine, all V5-V8 ps2 machines have the same points as on this picture.

Stage one: drill holes, atach LED's in place, route LEDs power and ground.





Stage two getting Power: ok the picture below shows the GND and 12V connection on the PSU, "only V5-V8 ps2's".





Stage three: plug it in

[retro]

nice! not to mutch... real nice.
mine is a bit to mutch. the hole livingroom shines and flickers blue at night

[Agent_underfire]

ha ha ha

[codiebanks]

just wondering how did retro put a reset button in the control pad cause i think that sounds like quite a good idea. sorry for ruining the thread but really would like to know how this has been achieved especially if pictures of it can be sent as well. cheers.

[mak]

How much would you charge me to do a ps2 and ship it to america?

[enterthesandman]

codiebanks (sorry but what a truely corny narme) i think you can find this in the search thing but basically it involves soldering a doorbell in your ps2 then soldering the button of the doorbell in the controller

[retro]

well i didnt do the doorbell mod, i just solder a button paralell to the standard button and wired it out to the back of my controller.

But if you want to keep a good look on your machine i recommend the doorbell mod.
extra wires isnt that beautiful...
But mine mod is almost free and wery simple to do.