Actualy you could window it but it's a big pain in the arse to do i had to do it on my hand held fan that i made what you do is cut out a piece of plexi or plastic to fit exact in the hole (not easy or fun) then get some white glew i used this elmers stuff that dry's clear lay the ps2 lid down on somthing flat and put a thin strip of glew along the edge of the plexi/plastic and set it in then just wipe away any access glew that pop's up then put somthing flat on top of it and leave it for a half hour take whatever you have sitting on it (if you do not realy nesasery) then flip it over (the glew should be set enough to do so but be gental anyway) then wipe off the access glew on that side then just leave it on somthing flat for 12 hour's (just to be safe) and BAM you've got your self a smooth and clean looking window the edge's even look nice and clean cuz the glew dry's realy clear. But as i said it's kinda a pain to do.
Custom case window : Done
Custom japanese case dremil engraveing : Done
Controller analog led swap/hooked up to vibration : Done
Memory card windows : Done
Memory card interior LED : Doing it next weekend
Controller plug window : Doing it next weekend
Conrtoller plug interior LED : Doing it next weekend
Controller case LED's : Were in but they were to dim so im gonna get new one's
ps2 interior case LED's :In progress
Power/reset LED swap :In progress
LED fan swap :In progress
Custom N64 NES case : Done but 2 of the 6 led's died not sure why i'll fix it later.
My favorite anime board http://animeboards.proboards19.com/