PStwo 3 Channel Audio Light Show

http://www.freedomlives.com/cart/images/324anips.gif

Check it out This is a cool project and Cheap. A few dollars in parts. Its a light show for your PStwo grill. The audio from a game, movie or whatever is converted to light. There are 3 bandpass filters spliting the audio spectum into 3 bands low, medium, high. The output is displayed via 3 different color LEDS I used SM type but just about any could be used.
Attached is a MPEG movie with sound of the mod in action.
R4, R5, R6 I ended up using 0 ohm resistors to get MAXIMUM brightness. Matching LED's is a must! Up to 3 led's per band would be OK.

**********MPEG Movie************

http://www.newagepsx.com/web/324_Col...c_Main_400.jpg

http://www.newagepsx.com/web/324_Col...ages/ps324.JPG


http://www.newagepsx.com/web/324_Col...ges/ps324a.JPG

http://www.newagepsx.com/web/324_Col...ges/ps324b.JPG

you could also use a 10 segment LED bar with resistor array and make a full graphic display for each band....

nice work. realy nice!

Quote:

---

Originally Posted by zabolyx

you could also use a 10 segment LED bar with resistor array and make a full graphic display for each band....

---

Here is a link to the circuit I think you are discribing.
Full spectrum display
It may be a good idea for the Xbox more room.
Here is the XBOX Jewel prototype in its early stages of assembly A lens it put over the top of it and its set in acrylic resin.
http://www.freedomlives.com/cart/images/boxproto.jpg

that's awesome. keep up the good work :)

bump

hey... did you ever finish the Xbox jewel?

Yep and went a step further and modified the circuit a little for a audio light show I put in a Slot cabinet that was converted to a upright XBOX media center. The circuit handles literly hundreds of leds on two audio channels.
Here is a movie of it in action
http://www.newagepsx.com/cart/images/MOV00347.MPG

http://www.newagepsx.com/cart/images/DSC00338.JPG
http://www.newagepsx.com/cart/images/DSC00344.JPG
http://www.newagepsx.com/cart/images/DSC00343.JPG

The top portion is of course in red and to the left and right of the center logo there are 3 bands of different color leds. It worked out awesome. I used high power transistors on the output to handle the many leds. I also have a Different one for the PS2slimline with clear cases Its a multicollered P S 2 logo. Dont forget to see the movie!!!
http://www.newagepsx.com/cart/images/DSC00349.JPG
Here is a Movie of it in action
http://www.newagepsx.com/cart/images/MOV00348.MPG