The above video goes away if you are a member and logged in, so log in now!
tape mod help –
Im following the directions at http://www.swapmagic3.com/ and I can get the switches 2 and 3 fine , but switch 1 I have tried numerous ways and cannot get it to trip. Can anyone who has done the straw method help me get the switch 1 working?? Does it go inside the gap or in the little hole to the right of it? This part specifically is where I cant get it: http://www.swapmagic3.com/11a.jpg
i had problems with this one also i hope this helps i used this way. Take another straw cut it so its about 12cm long. Then cut it vertical so you have one big "flat" straw cut it vertical again so you have two of 'em. Put them on top of each other and fold them so it's 6cm long. Now go back to your pstwo stick that straw like this | in the beginning of that "hole". if you think you can't push it any further try it a little harder it should go furter about 0.3cm and it will work. Sorry if my explanation is weird as you can tell english is not my 1st language. it may not work right away but keep trying good luck!
theres a easier way but takes more time
put in any cd, i put in a music cd and turn the ps2 on with the lid open it will goto the brower screen the cd will not spin since u have the ps2 lid open
cut a straw 3cm in length and stick it into the hole to the RIGHT of the gap or in the gap it doesnt matter
push the straw in about 2cm down if nothing happens then pull it out and try again but in different directions ( i tried for like 5-10mins before i could get the cd spinning
eventually you will hit a button in there that will cause the cd to start spinning
that means u got it working