The above video goes away if you are a member and logged in, so log in now!
swap magic and gameshark
swap magic and gameshark –
hi, i got a CC chips but i can't play my backup game with gameshark. So i was wondering, will it work if I load gameshark, then when it ask me to put my dvd game, i put the gameshark then put my back up game?
i got a pstwo with CC.
I have not had any success with you meathod in prior tests. Might I suggest you do the following...
My Current Setup:
*GameShark w/ Media Player Software (Same as Broadband Enabled)
*SwapMagic v2.0 USA Build
I have got a few games to load successfully with GameShark codes/cheats enabled. The process I use is as follows:
Insert the GameShark disc and allow it to load.
Select "Expert Mode" from the list of options when the title screen loads.
Select the Game and Cheats you wish to enable and press the start button on your controller.
Press the Start button once again to confirm that you want to load the selected game and cheats. The console sled should now open to allow you to insert a disc.
Insert the Swap Magic disc in the sled and press the eject button on the console.
The disc sled should now close automatically.
Press the "X" button on your controller once the sled completely closes. If done correctly, console should continue to load Swap Magic.
When Swap Magic Loads, it will prompt you to swap discs.
DO NO PRESS THE EJECT BUTTON ON CONSOLE!
Using the KnifeSwap, CardSwap, SlideTool, or Flip Top Case will work. The trick is that you must remember never to hit the eject button after SwapMagic loads. Using this meathod, the console does not detect that the disc has been changed so it will overlook running the disc check process again.