Swap magic

Ok hi guy's, Sorry for being such a n00b, i have had a read through the forum

and cant still see the solution to my problem, im using swap magic, but i did

not get anything with it other than the two disc's, ive been told i need three

little slider things, is there any other way of inserting something into these

Spot's, while i do not have the proper equipment?!?!

thank's in advance for any response.:)

For Chubby PS2

Just make your own tool

open the pic you can find in my attachement (cam-shot of slide card)
(best: irfan view)

print it in b/w, draft, 100% size

cut out the pic

glue it on an old phonecard or similar stuff (make sure it is resistant, e.g the plastic frame that comes with mobile-sim cards)

cut off the edges that are not covered by the pic you glued on

for the circular hole, just use a drill-bit of the right size

it depends on your model i think,
if you have an old one (the fat model), you can make your own swap tool.
in that case you have to search around for the instructions.
you only need a thin pice of plastic card and some scisors to do it.

Ok thanks very much for the quick response guy's,

i do have the slim line one and i thought to myself surely*as mentioned* i

can make my own tool's, does anyone have a decent diagram of where they

Go? i know tool one and also tool two, but three i just cant fathom out,

As again, thank's for your reply's. :)

Quote:

---

Originally Posted by McBeth

For Chubby PS2

Just make your own tool

open the pic you can find in my attachement (cam-shot of slide card)
(best: irfan view)

print it in b/w, draft, 100% size

cut out the pic

glue it on an old phonecard or similar stuff (make sure it is resistant, e.g the plastic frame that comes with mobile-sim cards)

cut off the edges that are not covered by the pic you glued on

for the circular hole, just use a drill-bit of the right size

---

Ok ive had a look at the slider tool,*thanks for the post* but why am i being

told i need three seperate tool's?!?!?to put in certain position's :banghead:

With the slimline's (i have no personal experience with them) but there are 3 sensors which need to be permanantly in the "closed" position. There is a way to do it with tissue and a straw :lol: but like i said i have no personal experience doing so.

my instructions were for a tool for the chubby ps2 *as mentioned*

what you want is to disable the sensors.....yes with tissue and tape

http://forums.afterdawn.com/thread_view.cfm/320910

Thank's very much for the quick replys again, cheers :D