mc xploit not reading frm my ps2 mem card

[ps2dragon]

I just wanted to let you know that you can use the "Independence Compiler 4.1 [Title.DB FIXED]" found here, to build your exploit disc.

[magemasher89]

yea, but will it give me the red screen if place a burned image either on a cdr or dvdr?

[ps2dragon]

yea, but will it give me the red screen if place a burned image either on a cdr or dvdr?

Yea you will get the red screen, because it's not an official PS2 or PS1 game disc. This is why I mentioned reading over the "Exploit Tutorial for the Total N00B! v1.3" located here, incase you haven't found it yet.

That tutorial gives you three options of booting the exploit disc:

1. Install with the Exploit Installer CD to run on a modded console.
2. Install Codebreaker (NTSC Only), AR MAX w/wout EVO pendrive, N-Port, Xploder v4 Software or Sharkport/X-Port.
3. Install using your Retail HDLoader.

Right now I'm just reading up on how this is done without a mod-chip (which is what I have).

[magemasher89]

Yea I have read all this and this is what I have
ar max w/ evo pendive if that helps any.

Yea you will get the red screen, because it's not an official PS2 or PS1 game disc. This is why I mentioned reading over the "Exploit Tutorial for the Total N00B! v1.3" located here, incase you haven't found it yet.

That tutorial gives you three options of booting the exploit disc:

1. Install with the Exploit Installer CD to run on a modded console.
2. Install Codebreaker (NTSC Only), AR MAX w/wout EVO pendrive, N-Port, Xploder v4 Software or Sharkport/X-Port.
3. Install using your Retail HDLoader.

Right now I'm just reading up on how this is done without a mod-chip (which is what I have).

[ps2dragon]

Ok, I'll do my best to help you figure this out.

Can you tell me if you have any of these things?

1. Original PS1 disc (I need the bootfile from this disc)
2. Ordinary USB key (one that you plug into your computer)
3. Hub with cables (so you can connect your PS2 to your PC)

EDIT: You DEFNITELY need the PS1 disc, but you don't need the other two things. I'm only hoping you have a USB key, because this would make it a lot easier for me to help you after this exploit has been setup.

[magemasher89]

Yes I have all the above.

[ps2dragon]

Ok, now I need your PS1 boot file information. I'm going to create a TITLE.DB file for you and pretty much setup the entire exploit for you, since I want to learn how to do this myself.

If you put any PS1 disc into your computer's cd-rom or dvd-rom drive, you should find a file like SLES_###.## (for PAL), or SLUS_###.## (for NTSC). Give me as many of these as you can from all your PS1 games incase one of those PS1 games don't work. I'll be adding them all to the exploit, so you can use any of those PS1 discs to boot the exploit off your MC.

EDIT: if you can also tell me what game each SLES_###.## or SLUS_###.## came from, that will be helpful also, but not necessary.

[magemasher89]

sorry about that. changed my email address in profile
and had verify it'. which meant I could not reply...
so here are the NTSC games that I have
the ID's are
SLUS_000.45
SCUS_949.66
SLUS_008.92
SCUS_945.05
SLUS_008.95
SLUS_004.64
SLUS_003.30
SLUS_005.02
SLUS_008.84

Thats all I have for now but have a few ps2 games Im not sure those would work?

Thanks for the help dude!

Kev

[magemasher89]

Thanks to ps2dragon I am able to boot off my mc the exploit and now I have full control to do the next things... Thanks again for everyones help on this.

[ps2dragon]

Thanks to ps2dragon I am able to boot off my mc the exploit and now I have full control to do the next things... Thanks again for everyones help on this.

Your Welcome. I'm glad I was able to help and it's all working now.