fmcb&swap magic problem

[PJS111]

Hi, so I've got FMCB installed. When I put in my SwapMagic 3.6 disc and press LOAD, the FreeMcBoot Logo comes up and the PS2 goes on normally. The game doesnt load. Can I change the FMCB settings that it doesnt 'interrupt' Swap magic loading the game?

Thanks for replying.

[djflexmaster79]

this should work for you:

1. Start up PS2 with out Swap Disk in it.

2. Go down to: FMCB Configurator.

3. Scroll down to: Configure OSDSYS options.

4. Scroll down to : Skip Disk Boot : ON/OFF

5. Change that setting to ON.

And if you wish to save that setting :

Hit return, and then scroll down and save CNF to MC0 or MC1.

DJ
Site Mod

[PJS111]

Thanks, I'll try that when I'm at home again(im on vacation right now).

[JNABK]

Im guessing you are trying to use SwapMagic and a backup as it would normally, so an easy solution would be to remove the MC with FMCB on it, until the backup has booted, then re-insert it (if thats where your game saves are) and you wont need to change anything.