Printable View
i have a belken router with my computer , xbox, and ps2 hooked up, but only my ps2 and computer are on, my problem is when i try to connect to the ps2 via flashfxp, it says connection failed. i have the execftp loaded on my hdloader and everything loads fine, i can see all the dos type screen on my tv? i have search but i am getting even more lost when i search?? PLEASE HELP!!
ok after searchin more a bit, then look at all my settings, my router gateway ip address is 192.168.2.1
the one that is on the tv screen is gateway ip: 192.168.1.1
do i have to change that gatway ip on my ps2 to the one that is on my router?
It's the router. I had a Belkin and got rid of it since you can't assign an IP based on a MAC address. If ExecFTP supported DHCP then you would be ok.
Yes you have to change Gateway on your Ps2 to your Router Gateway IP 192.168.2.1 then it should work.
yepQuote:
Originally Posted by DickesB
and ure ps2 should have the same first 3 sections as your pc
Eg, PC -> 152.981.456.1
Make ure ps2 152.981.476.54 (make sure its high so ure router will take a long time, if ever to assign that ip to anything)
ok, i changed the gateway , still same problem..
This is my computer
Physical Address: 00-11-2F-0D-8B-04
IP Address: 192.168.2.27
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Server: 192.168.2.1
DNS Server: 192.168.2.1
This is my PS2
ip 192.168.1.101
netmask 255.255.255.0
gateway ip 192.168.2.1
?? i done everything that was suggested. any more ideas of what the problem is?
Change your PS2 to 192.168.2.101 that will put your PS2 into to same subnet as your PC and router.
thanx, ill try that now
that did the trick, thanx for all yall help
I'm having the same problem as Shogun, to change the IP address and default gateway etc of the PS2 you have to put that file onto the mem card dont you? I remember reading that in Monkeys tutorial. Thats correct right?