Parts for the Ultimate PS2 Combo

[urmele]

Hi there,

i have some leftovers from my project.
Look here for more detailed info:
http://psx-scene.com/forums/showthread.php?t=61737 (The Ultimate PS2 Combo)

The stuff i wanna sell is only a complete set of an IDE to SATA converter
plus Adapter for it and the needed cable set to connect a 2,5" SATA HDD
to the Network Adapter.

See the picture below.

It comes without Network Adapter and HDD!
All the other stuff on the picture is included!
(I also include an anti static buble bag for the HDD, so it will be protected
in the big slot of the old fat PS2).
There is no heat problem if you put the HDD inside it, because it will reach
only room temperature (at least if you use a common one and not a high
speed 2,5" HDD, which is not really supported by the PS2....actually,
even the common ones are not really supported, because they are much
faster than the PS2 can handle).

Anyways, i would like to sell the stuff to somebody who will try to rebuild
my project by himself, because it is always better to have some more input.
The stuff is exactly the same i used for it and if there is interest, i also can
sell you the needed 6xSwitch and the 2xSwitch to complete it.
But that will take about one or two weeks for me to order it first.

If there is nobody who wants it all complete, i would like to get 28 Euros
for it (since it is quite some work to solder it, isolate it and make it fit).

If somebody wants it complete with the switches, i only charge the 28 Euros
plus the actual cost of the switches which i pay for them (check out the links in my topic).

I am located in Germany, but if you pay for the shipping, i will send it all
around the world.
Just check out this:
http://www.deutschepost.de/dpag?tab=...017119_1009418

I guess it'll be about 6 Euros to ship it around the globe.

Hope somebody wants it complete.

Until then
Health and Wealth to you,

urmele


P.s.:I know the name of the project sounds a little bit awkward.....

[kabUMz]

I want this parts to rebuild your project.

Also schick mir bitte eine PM

[urmele]

There are two fans for sale.
I bought them for my project, but they make both more noise than the
original NIDEC D06R EX 07SS102 fan.
Because they shuffle much more air around.

If somebody operates his PS2 in hot environment and his original
NIDEC D06R EX is broken, it might be a good solution.

The first one is a Micronel F62 MM
https://www.distrelec.com/distrelec/datasheets.nsf/WebAttachments/96D0E60562F003E2C12570EA00166972/$File/F62-9.pdf

I bought it this week and used it only for some tests (it's brand new!).
You can have it for 8 Euros.
It will be shipped from Germany, so you have to add the shipping costs.


The second one is a Sepa MFB60D05
https://www.distrelec.com/distrelec/datasheets.nsf/WebAttachments/593A5CA9A3A122EEC12571340043C4B0/$File/390262-64.pdf

That one goes for 10 Euros plus shipping (also brand new)!

If there is interest, just send me a PM