The above video goes away if you are a member and logged in, so log in now!
xLink Kai v7.4.22 –
The "Other" PSN has been updated. Only Windows build is available. OS X build coming soon. Thanks to Team xLink Kai for making this.
Tutorial on Installing by djhazardous at PS3Hax"
Originally Posted by PS3Hax.com
Originally Posted by djhazardous
News Source: xLink Kai v7.4.22 for PS2/PS3 (Windows) | PS3Hax Network
Thanks to master737373 for the news submission!
Do you HAVE to have a crossover cable?
I think that if your computer has a Gigabit Ethernet port, then it's not necessary.
Originally Posted by kylepsp
Hmm I have no idea, device manager time!
Connect the PC and PS3 together with the ethernet cable and check your IP address on the PS3. The PS3 will give you a Private network number. If it does then you're good to go.
So whats improved in this version?
My computer does not have a wireless card. So if I unplug the etheral from it, I do not have internet. Is there a way I still can use this feature?
Only one thing, the tuto is very old:
-U can connect ps3 to xlink only with one network connection on the pc, without need 2 networks card and not needed to share or bridge anything.
-Go to start, and write CMD, then press enter.
-See in the list where says IP ADRESS, write it in a paper.
-See where it says Default router or Gateway and write it on a peper too.
-Go to your browser (Iexplorer, firefox, etc) and write the Gateway number.
-Go to NAT and create a rule to redirect port 30000 to the Ip wrote before, (the first u wrote).
-All is done on the PC, now go to config the ps3.
-Go to net settings, configure your connection by wifi or ethernet, always all in automatic.
-When u arrive to the question "DHCP host name", write there again the firs Ip (the firs i said u must write, not the gateway).
-Accept and that's all.
-Q: Why it doesn't give me ip 10.xxx.xxx.xxx?
-A: Try to go to the router again, and disable de DHCP, going to settings -> Lan -> disable DHCP server.
Disable DHCP server is only needed if u have being browsing with the ps3 before, and the ps3 stores the last DHCP server in the subnet (in this case the router), after disabling DHCP and get the good ip gived by Kai (10.xxx.xxx.xxx) u can enable DHCP server again.
See u here
My english is not quite good cos I'm spanish, sorry.
would love to see the PSN logo on my PS3 with the CFW replaced with an Xlink-
Kai logo some day much like freestyle dash on the 360 lol
Originally Posted by bosse almighty
go buy some used pci or pci-e ethernet card.
they're quite cheap nowdays, about 3-5$