RELEASE - Rebug Update Package 0.1

[The Central Scrutinizer]

***** THIS DOESNT ALLOW PSN *** USE AT YOUR OWN RISK *****

***** FOR REBUG 3.55.1 ONLY ****** FOR REBUG 3.55.1 ONLY *****

IMPORTANT NOTE: If you have installed the so-called Advance Mode Patch you will need to reinstall Rebug 3.55.1 from Recovery Mode first, before using Rebug Update Package 0.1

We decided to make Rebug Update Package 0.1 instead of releasing a new firmware because these are only minor fixes, updates and tweaks and the end result is the same in a much smaller package. This update is for REBUG 3.55.1 ONLY (We will be adding a Rebug 3.41.2 equivalent to this post soon).

UPDATER WILL PERFORM THE FOLLOWING TASKS

Update both the Rebug Selector 1.2 package and the current install with Rebug Selector 1.4

(Larger fonts, faster and easier to use)

Fix the cause of Uncharted 2 and some other games Black Screening

Update the current version spoof files to 3.65

Minor tweak to the paths in Package Manager

INSTALL:

Install Rebug_Update_Package_0.1.pkg
Run Rebug Update Package 0.1 from the [Games] menu
Follow the on screen prompts
PS3 will reboot when finished

NOTE: Once the PS3 has rebooted you can delete Rebug Update Package 0.1 from your XMB as it is not needed anymore.

Enjoy..

LINKS AND MD5 CHECKSUM:
Download from Codename: REBUG

Rebug_Update_Package_0.1.rar
f7e2fea766a05cb8f1072d8fd5e17fc8

Rebug_Update_Package_0.1.pkg
5348720e6144d2213c0f81198afd400c

Update On issues usings new selector after update:

sup everyone,

I will chime in on the issue some of you are having then trying to use the new selector after the update.

This issue is caused by your HDD being corrupt, it has nothing to do with Rebug or any of our apps.

I have had this very same issue where it would not change modes after updating to the new selector, it has nothing to do with the selector itself. If you found out you have an issue going to normal mode or trying to change any of the menus and it just keep putting you in the same mode you are currently do not waste your time trying to figure it out... I have done everything in my power to fix the issue and I only found one solution (I will get into that in a min.)

Now before you go doing anything drastic make sure you backup your xreg you can either do this manually or use the xreg backup tool found at Codename: REBUG

Now for the fun part...

1) You will need to pull the hdd out of your PS3 and connect it to your desktop/laptop

2) You will need to fully wipe the partition and format the dive in windows/linux/mac (it doesn't matter what operating system but if your following this post its more then likely your a windows user) This cannot be done on the PS3 itself IE. The recovery menu, so don't waste your time :P

3) Once you have wiped the partition and formatted the drive stick it back in the PS3, It will now show a screen stating your hdd is fuct and will need to reformat it and then install your firmware.

4) Put your flashdrive with Rebug 3.55.1 in the PS3 and start the install.

5) After you have a fresh copy of Rebug on your fresh system you can install Rebug Update Package 0.1 and your menus and modes will now work perfectly.

6) (Optinoal) If you made a backup of your xreg you can now reinstall it.


~evil

For more information and discussion visit the support thread that is right here on: PSX-SCENE (RELEASE - Rebug Update Package 0.1)

And visit the Codename: Rebug support forum here on: PSX-SCENE