The above video goes away if you are a member and logged in, so log in now!
Just tried with an Olimex PIC18F4550 using USB SPI HAX and MetalPhreak's 20 mhz hex... nothing... I've got blank screen when powering on the PS3 and Eject button.... I'll investigate... Any ideas?
Has anyone got the led to flicker or flash with the diygadget usb spi utility? Mine is a solid red shining light...From start to end. Exploit works, just the led isn't flashing when the console boots and reads from the device...Same for v1.2 and v1.3...
Same here. Still serves its purpose, but it would be slightly amusing if it flickered on load.
Originally Posted by CakeTime
I'm gonna take a stab in the dark and say you aren't running 3.41 firmware
Originally Posted by mdmwii
please compile your hex 1.3V for pic2455 12Mhz bootloadable
Originally Posted by MetalPhreak
Last one before bedtime
Originally Posted by torsion
I found someone to assembly this to me =]
But I need to ask you about the components...
Resistor Carbon 5% 1/4 W 330K
Resistor Carbon 5% 1/4 W 330R ?
and which capacitor/condensator ?
4,7nf x 50v
4,7pf x 50v
470pf x 50v
47pf x 50v ???
MetalPhreak can you please compile your hex 1.3V for pic2455 20Mhz thanks..
i have prepared my board with this diagram: http://img822.imageshack.us/f/psgroo.png/
after that i have flashed the bootloader fpr 20MHz crystal on the PIC18f2550.
But how does it go on?
do you have this with v1.3 and 12mhz? bootloader version?
Originally Posted by iLLNESS