E3 Card Reader v3.50 and LOWER only! - Downgrader Released!

Printable View

Show 50 post(s) from this thread on one page

12-03-2010, 04:41 PM
The Central Scrutinizer

1 Attachment(s)

E3 Card Reader v3.50 and LOWER only! - Downgrader Released!
DOWNGRADING WILL ONLY WORK IF YOU ARE USING V3.50 OR LOWER!
AND THIS THREAD IS FOR THE ENCRYPTED E3 CARD READER ONLY!

http://psx-scene.com/tmp/psx-scene/pictures/e3-card.jpg

[ame="http://www.youtube.com/watch?v=wi6s-W2gXKU"]YouTube - E3 Card Reader puts 3.50 into FACTORY SERVICE MODE and ability to downgrade for PlayStation 3 PS3[/ame]

I just got this news of this from my source. And you heard it first from DCEmu Reviews! You can read our full review here or garyopa's here.

You can purchase your E3 Card Reader at Acekard.ca (10% off - coupon code 10acekardca), LighTake (10% off - coupon code TJOOS), *********** (8% off - coupon code PAEX8OFF, VolumeRates, MyGamingMart, ModchipCentral (5% off - coupon code psx-scene) and Modchip.ca, DScartshop (5% off - coupon code dscartshop)

Quote:

Dear friends,

Thank you for using E3card Reader PS3. Today we will bring you a big surprise: the E3-Downgrader for E3card Reader. Yes it's THE downgrader which can turn your 3.5 PS3 down to any version you wanted, i.e. the 3.41. It's no time limit, no PC software need to download, no need to write any emails, no need to wait and after all it's FREE. Yes, it's true. We can even proved that today it's not the day one of you need to go on board of some you know what ships, that of cause because we are Chinese. You can review the videos by click here, download the upgrade file by click here and download the 3.41 FW package by click here.

Password : iLoveE3
please note that it's case-sensitive.

If you have any questions, please feel free to contact us.

Best Regards

E3Diy Group
E-mail: e3diy.ok@gmail.com

How to downgrade firmware 3.42/3.50 (NOT v3.55) to firmware 3.41 with E3 Card Reader :
1. Download and extract "e3downgrade_12.03.rar" to your computer
2. Insert E3 Card Reader into the USB port of your computer.
3. On your file browser, open "E3Upgrader"
4. Drag and drop .bin file from "e3downgrade_12.03.rar" into "E3Upgrader"
5. Red LED will flash. When you see the blue LED, that means the upgrade is successful and complete.
6. Remove E3 Card Reader from computer
7. Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
8. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
9. Turn off system via menu
10. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
11. Load any blank FAT32 USB flash drive device with 2 files in the root directory:
  1. Modified 3.41 PUP
  2. Lv2Diag.self (File 1)
12. These must be the only files on the USB key and must be placed in the main (root) directory.
13. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
14. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
15. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
16. (Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
17. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive.
18. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
19. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.
To go back to E3 Card Reader jailbreak device, just drag back the normal .bin files. - e3 card reader, new generation ps3 chip with mulit-function

Files can be downloaded at E3DIY
Leaked modified 3.41 PUP and Lv2Diag.self files - Download DGF.rar (via) Sendspace.com

Quote:

xiaNaix update:

Password for file is iloveE3. If you mirror it, please do not remove the password at their request.

GaryOPA has confirmed this working and posted some quick results HERE. Congrats to the E3 Reader team! :headbang:

E3 Official Site: e3 card reader, new generation ps3 chip with multi-function

News Source: DCEmu Reviews
12-03-2010, 04:44 PM
chesh

So, speculation until the sites come back online?

Edit: Ok, watched the video and I see that it loads service mode, but where's the actual downgrade?
12-03-2010, 04:51 PM
garyopa

Not speculation, xiaNaix been in chat with the makers of E3 and I going to personally test it on my v3.50 slim the moment the files are available.

All you need is "SERVICE MODE!"

Once that happens you can use those previously leaked DGF.RAR file with the modded v3.41 PUP and the two .selfs and just follow the normal steps of downgrading, and turning off service mode!
12-03-2010, 04:53 PM
Phara0h

Quote:

Originally Posted by chesh

So, speculation until the sites come back online?

Edit: Ok, watched the video and I see that it loads service mode, but where's the actual downgrade?

I wonder if they ripped off PSGrade and found the USB-key..... :chinscrat:chinscrat:chinscrat
12-03-2010, 04:53 PM
dcemureviews

Quote:

Originally Posted by chesh

So, speculation until the sites come back online?

Edit: Ok, watched the video and I see that it loads service mode, but where's the actual downgrade?

I wished it showed 3.41 at the end. So don't kill the messenger.

PS3Break and PS3Key has stated that they will be releasing a downgrader soon as well.

Quote:

Originally Posted by garyopa

Not speculation, xiaNaix been in chat with the makers of E3 and I going to personally test it on my v3.50 slim the moment the files are available.

All you need is "SERVICE MODE!"

Once that happens you can use those previously leaked DGF.RAR file with the modded v3.41 PUP and the two .selfs and just follow the normal steps of downgrading, and turning off service mode!

Thanks for the confirmation gary.
12-03-2010, 04:53 PM
crnrts

still not a free solution so absolutetly pointless.
12-03-2010, 04:53 PM
Goon3r

Apologies if this didnt need asking,
but how come they didnt show you the fact the ps3 was on 3.41 after it...
does the fact they can get it into service mode suffice?

EDIT: Could this code not be obtained from the E3 to then be used on other dongles ?
12-03-2010, 04:54 PM
theruler

Damn, wish someone would find it so we can have it across all devices.
12-03-2010, 04:55 PM
korn16ftl

some one should test this with an X3MAX as it is supposed to work with any payload and all if all the files are correct that is
12-03-2010, 04:56 PM
garyopa

Quote:

Originally Posted by Goon3r

Apologies if this didnt need asking,
but how come they didnt show you the fact the ps3 was on 3.41 after it...
does the fact they can get it into service mode suffice?

Service mode is enough, just use the previously leaked DGF.RAR files and follow the steps.

Show 50 post(s) from this thread on one page