Article: Rogero CEX 4.30 / 4.21 CFW v2

[hemtoni]

The error calls 8002f2b5 after that the problems begin

[Mentalist]

It freezes when I start the update in recovery mode ;(

Wich firmware you were before?

[hemtoni]

The first rogero cfw 4.21 v 1.00

[Mentalist]

The first rogero cfw 4.21 v 1.00

8002f2b5 < This errors occurs even in OFW it means you are stuck in a update loop. It was caused by the corrupted file size from the sendspace link I already asked the link to be removed.

Try this 3.56 Hard Drive Upgrade Problem Fixed * - PlayStation Forum Why dont you try using your 4.21 CFW from rogero? Please do not use any OFW 3.56 above do do this!!!!

[hemtoni]

I cant install any firmware it shows me now 8002f2c5

[free47]

Question, Does Rogero CFW have issues loading games from ext USB if more than one ext USB drive are plugged in?
I'm currently on Rebug 4.21.3 REX and that is the only issue i've had with it so far.
Burnout Paradise & COD Black Ops 2
both fail to load external with more than 1 HDD plugged in.
Can anyone test these games and verify?

P.S. I like that they've added reActPSN support brilliant, now if the reAct developer could update the app to work above 3.55 would be great!!

4 30 have issues

[STLcardsWS]

@Mentalist
Removed your DL link. They do not meet the official PUP size either. As one of our links on the mainpage did not (all links are from Rogero Official Page). I removed the 36MB link.

THAT IS WHY A PUP SIZE AND MD5 are provided. I advise everyone to verify any PUP before installation.

[Mentalist]

@Mentalist
Removed your DL link. They do not meet the official PUP size either. As one of our links on the mainpage did not (all links are from Rogero Official Page). I removed the 36MB link.

THAT IS WHY A PUP SIZE AND MD5 are provided. I advise everyone to verify any PUP before installation.

Thanks for the correction STLcardsWS! I pretty much apreciated it.

[Ps3funktionz]

I cant install any firmware it shows me now 8002f2c5

I too have encountered the same error recently. Not sure about the error code but mine came after attempting to go from 4.30 rogero v1.3 to 3.55 via the 999 downgrader. Mine got stuck on the install forever and would not finish so i ended up turning it off and i kept getting the corrupt data/need to format message. All I can say is I hope you FTP'd your saves and have all your backups backed up. I had to format it. Formatted mine on a pc first just to be sure. Took me about a week to fix everything back to the way it was but its good now. Im on Rebug 4.21 now. I dont know if it has something to do with downgrading with a large hard drive maybe? Just a theory. Best of luck to ya. Let me know if you find out something I couldn't

[mayid25]

Thanks to Rogero again. I just upgraded to CFW 4.30 v2.00 and it is working like a charm.

Only the bad thing is dat you have to downgrade to CFW 3.55 to upgrade again to CFW 4.30 v2.0 or else you will get DATA CORRUPTED message if you try to install update from CFW 4.30 v1.04

Also you can use Rebug 999 to downgrade back to 3.55. then install 3.55.3 rex then install CFW 3.55.2 rebug and then install CFW 4.30 v2.00 ALSO INSTALL THIS ALL FROM RECOVERY MODE.