Printable View
Rogero is a pain to sign for, while keeping compatibility with other CFWs
Replace this eboot after installing.
dev_hdd0/games/SSNE10000/USRDIR/
Attachment 40938
if you didnt get an error code when starting then you have to be a bit more descriptive then saying it "dont work" but if it was an error code that should fix the issue.
Well, its just as usual... It doesn't boot the roms direct from multiman, as if nothing changed. Other then the snes core which doesn't work after installing these pkgs. I'll try replacing the eboot though, thanks.
Running latest Rebug 4.21.2, works loading the first rom. Subsequent loading of another rom from mm loads only the core and not the game......
Started MM
Started FBA rom
Game loads as expected
Pressed right thumb stick....returned to MM
Started NES rom, FCEU core loads but not game
FYI - both links are going to the same file......
I will let CaptainCPS-X know the issues.
I know one issue that is still present and its been like this for awhile on a few builds if you boot a rom in multiMAN the try to change cores you get a black screen freeze.(running rom then changing core in RA)
Now NES may have an issue that CaptianCPS-X may of over looked i will have to talk to him. but now there are two NES cores. FCEU and NESTOPIA. There needs to be a way for multiMAN and/or this mod to decide which one to use..
eboot wont fix that. i dont know what the issue is. if eboot was the issue you would of an errorQuote:
Well, its just as usual... It doesn't boot the roms direct from multiman, as if nothing changed. Other then the snes core which doesn't work after installing these pkgs. I'll try replacing the eboot though, thanks.
Yeah... I just went back to the beta build. All cores and boot from multiman working good on there...Idk what improvements official 9.8 brought. Might as well just stick to this build.
Same problem with GBA as with NES due to the addition of gambatte. It gets confused and then just boots up the core but not the game.
EDIT: Genesis is messed up too, only Snes and FBA work, at least for me. On Rebug 4.21.2
RetroArch0.9.8.pkg here guys. Use this, everything's working, all cores, roms booting from multiman and all that good stuff.
You are a bit incorrect there.Quote:
Originally Posted by Griff
That pkg is 0.9.8 Beta 3, (not the official 0.9.8) some cores work with multiMAN.
but these do not.
Mednafen_VB
Mednafen_neo_pop
Mednafen_PSX
Also the nestopia Core is not included in that pkg.
However if one would want the nestopia core they can remove/save it from the official 0.9.8 release and add it to the cores folder of that release.(that core will not be supported by multiMAN either)
.
any ETA on a 0.9.8 final that is working correctly?
thanks
ThX