[RELEASE] Waninkoko 3.55 CFW V2

[The Central Scrutinizer]

Scene Developer Waninkoko has finally released a more well-tested CFW for v3.55 PS3 Consoles!

!!! PLEASE ALWAYS READ THE THREAD FULLY, TO SEE WHAT PROBLEMS THERE MAY BE, AND ALSO RESTORE TO FACTORY ORIGINAL SONY FIRMWARE BEFORE INSTALLING ANY CFW INTO YOUR SYSTEM, AND BE FULLY AWARE OF ALL THE RISKS IN DOING SO !!!

Here is what Waninkoko's readme says thanks in part to Google translate:

This CFW is installed directly into the NAND has been tested in different models of console (FAT and Slim, reported in the main post) and without any brickeo or similar problem.

The testers have reported a high stability in the CFW and the same compatibility with games that could be obtained with different dongles.

The main core of the payload is based on Hermes, also has some features of PL3 and supplementary code and improved by Waninkoko.

Attempted to create an application that enable / disable the payload, so that after leaving a manager backup Blu-ray was functional. After some testing has not been able to be operational, it would be desirable for the various backups managers were in charge of implementing such functionality or may be added in a later CFW.

+------------------------------+
| Custom PS3 Firmware v3.55 v2 |
| Developed by Waninkoko |
+------------------------------+
| http://www.teknoconsolas.es |
+------------------------------+

>> DESCRIPTION:

This custom firmware for the PS3 increases the system capabilities of your console to allow installation and execution of homebrew applications.
This Custom Firmware can also allow the loading of legal copies (backups) using these new functions.

We do not support or support the use of illegal copies.
We are not responsible for any damage caused by use of the Custom Firmware.

>> INSTALLATION:

1. Download the firmware 3.55 for PS3 (PS3UPDAT.PUP file).
2. PS3UPDAT.PUP file patched using the patch included in this package using the application "bsdiff ( Binary diff ).
3. PUP file installs the patch as normal firmware upgrade.
(If you're in the version 3.55 you need to install from the recovery mode.)

>> MODELS TESTED:

- PS3 40GB FAT (CECHG04)
- PS3 60GB FAT (CECHC04)
- PS3 80GB FAT (CECHK04)
- 120GB PS3 Slim (CECH2004A)
- 120GB PS3 Slim (CECH2104A)
- PS3 Slim 250GB (CECH2004B)

>> KUDOS:

- Team fail0verflow
- Kakarot
- Flukes1
- Hermes

>> KUDOS TO OUR TESTERS:

- Jgade
- Etxe
- EXXtreme
- Vasolechecongalletas
- Carpi
- Mibaito
- Juaniyoalm
- XP10SiV

>> NOTES:

I regret the situation once again produced with my V1. The solution to this problem is not simple and is not expected in the short term.

>> Download 3.55 CFW V2 Waninkoko: (via) MEGAUPLOAD

Forgot to put hashes!

MD5: 6a6cfc701300c95b57b990d8d609e52f
SHA1: a4f155711bbb031022d0c531d70a0b7a180b7aca

News Source: (via) Teknoconsolas

[TempHK01]

Cool XD

[STRATEGIZER]

Even though I love his first CFW & it did not brick, Im still going to sit back & wait to see how this turns out. Just in case.

[reck]

guessing bricks will be limited in this release and this is just a 'clone' of others works

[[C*]]

No need to launch the payload EBOOT.BIN and the brick risk gone (although I'm on a Slim). Sounds good to me. I'll upgrade later.

EDIT: Wait I couldn't really tell from the release notes. Is a payload EBOOT.BIN needed or not?

[donnabot]

for now has this got anything above kmeaw? has anyone tried and noticed less freezing than kmeaw (which isn't too bad considerering when it works, it works well)

[Mbb]

[lang=nl]We want CFW 3.56 [/lang]

[Bretmaster5]

I think I'l stick with Kmeaw.

But yay. Development.

[allblacks]

Good Job,
I have a PS3 Fat CECHG04 on kmeaw CFW.
I have some problem to launch backup (discless not supported)
Can i with Waninkoko V2 launch these ?
My blu ray drive accept disc but don't see the content (out).

[got3nks]

That's interesting news. Dunno if I'm going to update to Waninkoko's CFW though since Kmeaw's is doing very good coupled with the latest version of multiMAN.

Any suggestions?