The above video goes away if you are a member and logged in, so log in now!
my config is here ...
DVD media work well with messiah & v5...
Is it possible that i need to use w1 instead of w to play ps2 dvds and dvd backups.. cdr ps2 backups dont work well either... i have a magic3 installed on a v7.. really need help.. have adjusted the azimuth MANY times without further compitability...
The person who helps me outta this is getting a big thank you.... ill send a chip or maybe a mainboard to a scph-15000 unmodded fully fuctional!
so, some news again from the homebrew-front!
today i compiled 3 new hexÂ´s
c) standard & HS2
best results with c): HS2 works much better than HS3! (with resonator) [will try with quartz & HS3 tomorrow]
but i still have troubles with some DVD media... some worked with a) but didnÂ´t worked with c) but the most DVD backups worked with c) - i think the DVDs are from better quality than the ones worked with a) or b)... so i have to say that magic ice code is the best homebrew code but still not stable! but still improvments are needed for booting DVD media i think...
someone knows when a update will be available?!
@torkild: are u using HS2 or HS3 ?!
Z will apear grounded because it is tied low (ground) in normal opertion . Z goes high (+5v) when eject is pressed. hope it explains :]
Also Crouso you must try put a 1 uf cap between GND and +5v on your chip
well... that sounds about your "Z"-theory )
i have a 10uF cap on GND & +5v...
can anyone tell me how to connect to PS2 in 54M mode?