New Homebrew Mod Dev Thread

[Robot]

the final value for the orange coloured resistor is?

[murcielago]

has anybody decompile the xilinx jed files ?
i guess with the proper information about the bios patch that resides in the xilinx code, plus the biospatch that Lacyg gave us and the already disasm info from the scenix we can make our own program , the thing i need i don't know how decompile the jed files if some one can help me let me know then we can also decompile the messiah and see how they work and put all the parts together and Voila!!!! Homebrew Magic 3 !!!!

Time has come !!!!! for the free code

[Raptor]

Originally posted by murcielago
has anybody decompile the xilinx jed files ?

you can't

easier just to dissasem magic3 - no doubt sporty or someone will post relevant info in the next few days

[Rattle]

Originally posted by Raptor
you can't

easier just to dissasem magic3 - no doubt sporty or someone will post relevant info in the next few days

You could also dump the bios with naplink and pukkos software. One dump without magic2 and one with, then you get all the info needed for the bios-patching part

/Rattle

[Gradius]

Originally posted by Gradius
There're just 3 resistors only, the values are:

- 2 x 33K ohms
- 1 x 153K ohms on v3 (I got 157K ohms on v4)

Gradius

PS: Guess? Come'n ppl!

Corrections, the "153k" isn't a resistor. Yep, it's a capacitor, but I dunno which is the real value, I don't wanna put apart my magic2.

Gradius

[EnTiTy]

i would go for 20pf looking at the data sheet its what ubicom recommend as the ideal value to suppress noise.
EnTiTy

[Gradius]

Well, right now, magic2 is really dead, with magic3 code around...

Gradius

[EnTiTy]

yep things are looking that way gradius.
EnTiTy

[sapitoloco]

I have the magic 3 code and is rev.16 and also i have a question??? Can i burn the code to a magic2 v3 chip? red pcb?
Thanks