I do speak german but not much, I assume that says, cut this track.
I thought trennen was the verb, to recycle.
Gaz
|
|
|
|
Would you like to get all the new info from
PSX-Scene in your email each day?
Want to learn more about the team keeping you up to date with the latest scene news?
Read about them now! Check out our Developer bios, too! | ||
|
|
I do speak german but not much, I assume that says, cut this track.
I thought trennen was the verb, to recycle.
Gaz
Last edited by Gazdaman; 01-23-2003 at 02:34 PM.
This one will work with PIC 12C508A too, right?
Gradius
yes it will.
Gaz
That's great.
The MCLR must be OFF ?
So the fuse value is 0FEAh (checksum 98A2) ?
Gradius
The MCLR must be OFF ?
yes, see my description in the post on top of this page.
reset (=MCLR) internally to VDD connect, internal RC oscillator, no copy protection *lol*, watchdog off
the fuse is FEA, that is right.
trennen (german) = cut (english)
Die Leiterbahn hier trennen = Cut the wire here.
Gerd's colored diagram and my fixed diagram in black and white are the same.![]()
so why is mull trennen, rubbish recycling?
Gaz
is it not.
müll trennen = waste seperate. that means, you put your waste and garbage in seperate garbage containers. glas to glas, paper to paper, organic waste to organic waste.
the recycling comes later in this process.
the german word for recycling is..... recycling.we say "müll recyclen" .
![]()
Thanks a lot for the infos, I'll test this one in a few days and I'll report here the results, of course.
Gradius
The 2 diagrams are not the same, frankieboys shows an added bit where it seemingly goes to reset point on ps2 mainboard and the colour pic does not show this.
I have installed the 12c508 m3 fix as per frankieboy diagram and it does work, however i'm convinced the problem with gta vice city etc.. is media and not the m3.
My Ten Pence Worth
| « Previous Thread | Next Thread » |