The above video goes away if you are a member and logged in, so log in now!
Just tried another V10 GH026 PAL 50002 Silver which was previously working with old ice V910kit code swapped b and f on the board and programmed the chip with ICEREV but now get RSOD etc same symptom as above will try with the h off just for curiosity sake s it was connected for the previous code.
THis particular board did not require the 68-100pf cap as a few other v10's i have come across.
Any idea's would be greatly appreciated
as the mem card booting is my aim thru all of this.
Weirdest thing of all is that Dev Mode is the only mode working
no ps1 or ps2 modes will function.
Last edited by oz_shadow; 10-03-2004 at 11:14 PM.
mc exploit? i have already see it on other forum. ice team rip it? I hope not
try ask on another forum ... or try read included info ...
diagrams and pinout ?
I want to test it immediatly )
pinout as V910kit ... but swap B <->F and optional F and H ... 74HC73 need for ALL versions = same hardware for ALL
many thanks for your good new code!
Tested in v9 pal all games are running perfect at first time and RW support too.
Autoexploit mode = loads exploit elf from MC -> not tested because i don't have it.
Please can you implement this code in V910kit wihout autoexploit mode for people who want only boot in ps1-, ps2- and CHIP OFF-Mode?
Most people have many problems with V910kit-code in ps2 pal !
to stasik ... down again looks like u use old code (first upload)
Tested GH-026 pal work perfect.Great job.Thanks ICE team for new code.Today testing exploid mode.
Ice Revolution Test –
PS2: V10 Silver PAL BIOS MX
Chip: Titan sx + 74hc73DIP + 100nf cap between Z & GND + 68pF cap between R e GND + res 22Kohm on RESET
Code: ICE REVOLUTION V1-V10 (3-october-2004)
PS2Game Backup Bootrate: 100%
PS1Game Backup Bootrate: 100%
RGB Fix: OK
PSX1 imports fix: OK
Multi-Elf Games (protected mode): OK
Exploit Mode: the properly prepared executable runs perfectly, but the chip doesn't patch media inserted so it's impossible to load from cd/dvd;in addition it seemed to me that there are some troubles with sound in RealityMPlayer (in my case i've run ps2menu and then RealityMP)
Mplayer operations and disc swapping: OK
Sleep Mode: too complicated to set....it's better to wait until Browser screen that chip automatically goes off...neverthless it's OK
Boot from Browser: non implemented (RSOD)
NOTE: a great piece of code considering the perfect bootrate end the various features.The weak point, in my opinion, is the operation mode selection that's too complicated. Just one suggestion to the ICE TEAM (other than boot mode selection): if u can, please implement some sort of cd/dvd patching in the EXPLOIT mode.
Hope to be of some help.
Do you use 68pF cap between R and GND or without this (GH-026 pal)?