The above video goes away if you are a member and logged in, so log in now!
Homebrew Blakcat Code !
Homebrew Blakcat Code ! –
murata 50mhz Resonator
CD-R ps2 works everytime DVD-R ps2 works very random tried to change values on resistor but didnÂ´t help.
any sugestions ?
Frankieboy, have you tested BlakCat code on a v7 (with gap bios)?
My v7 boot DVD-R PS2 30% or less
In RESET I have 33 kohm resistor, now I go trying 16 or 22 kohm.
What kind of condensator between +5 e GND?
I have 15 pF ceramic between GND of resonator and pin 27 for added stability, see http://fly.to/magicfriend
10x for help.
10 mikro farad between + 5 volt and GND.
maybe your 33 kohm is to big and the chip does'nt recognize the reset signal. thats why i am use 16 k to 22 k resistor.
tra also alternative W1 point if you have DVD-R prbs, but cd-r is booting fine.
i have 1 uf cap between +5v and gnd , makes the mod more stable , and i also use 16k on reset
I've put a modblack onto my ps2 v7 pal scph39004, on sx28 dip with murata resonator and r=22k on the reset.
All cdr boot on the first attempt,i don't know for dvdr, i haven't dvdr to test, but i can't play my dvd movies ( dvd5 or dvd9).
I've tried to hold reset or to start the dvd from the navigation menu but the movie doesn't want to start, just a black screen.
Someone know what is the problem?
use W1 point and give it a try. maybe the cd / dvd media selection is not proper, so use w1 instead of w.
put in dvd movie, close tray and switch ps2 off.
switch ps2 on, press and hold reset 3 seconds. then dvd movie must start.
thx Frankieboy, i've try to hold reset 3 s when i start ps2 with dvd movies inside and it works very well, i think this is the same manip for psx games.
Thx for your answer.
the modblack code work very well and rce 789 too
sorry for my english
yes, it is the same for psx games.
if maybe an original ps2 game is freezing, you can use this 3 second hold also for ps2 originals and they will not freeze.