The above video goes away if you are a member and logged in, so log in now!
Help! Magic 3.1 doesn't work for v2.
Help! Magic 3.1 doesn't work for v2. –
Hi! I installed a Magic 3.1 on my old 30001 v2 (I belive is v2, GH-004, 020 BIOS). After installed every wires look OK. I can turn on the PS2 without any problems. But it won't play any CD-R and DVD-R at all. It only can play original without press reset button. Just like an unmod PS2. And I don't think is the laser problem. Because I just changed a new laser. Look like the Magic 3.1 mod chip doesn't support that BIOS. But Magic 3.1 not support v2? I bought that Magic 3.1 from mods4less.com. Can anyone help?
And sorry for my bad English.
Supports that bios. More then likely a faulty chip or a bad install (but of course like every other user with problems your install is shot on I'm sure).
I can sure that is a good chip. Because I also tried to installed the exactly same chip on a v7 before. Work perfect on v7. Bad installed..... not sure. Because this is my first time installed modchip on old system.
Finally I figure out the problem. The problem is the R point on the original dirgram is doesn't work (not a broken wire problem. The R point is not working). Anyway I use an alt R point. It work fine now. But one more problem come up. Burned CD work perfect. But burned DVD doesn't work at all. I can sure is not the media problem. Any idea? Is there have an alt W point just like the v5? Please help!
I have the same problem, where this alternate R point is located.
the alt. R point over to the pin beside V.