For all those who are getting trouble with fluffy...

[bobthemoule]

I tried a long time ago to build a fluffy 2 programmer, with no luck . And yesterday I tried to debug my pcb, and everything that can help me getting it to work. I checked every thread on this forum concerning fluffy, but my fluffy was alwalys giving me a "Error while verifing at adress 0000h" or something similar.
And I just discovered that the CP (Copy Protection) was enabled (fuse on). So I put it off, and the verification error disapeared immediatly !!

So if you checked everything and you're fluffy still doesn't work, just put CP fuse off.

Hope it will help someone...

[TerryS]

I build a 7 transistors Steel SX programmer few days ago, It waste me one day to figure out those tricky fuse bit lock, Some hex files contain fuse bit lock code. If you verify it, you will get error response.

Modblack10 hex file last line, they set "Code protect mode ON"

:08200000FF0FFF0FFF0FFF0FA0
:08200800FF0FFF0FFF0FFF0F98
:08201000FF0FFF0FFF0FFF0F90
:08201800FF0FFF0FFF0FFF0F88
:10202000F2077F0FFFFF02ABFA0280F0FFFF000014

[bobthemoule]

which software do you use with your steel programmer, mine won't work Could you give me an URL or something ? (even if my fluffy works as a charm )

[TerryS]

Bobthemoule :

For steele sx programmer, please USE Scenix2 file, It works for me with latest SX28AC chip I ordered all chips work fine in my PS2 now. sorry. I am not able to get Scenix3 even it is exist.

http://www.cryogenius.com/hardware/sx/

[bobthemoule]

I just found a new revision of the scenix2.cc code at http://www.linkline.com/personal/msa...3chipinfo.html , inside the http://www.will-o-wisp.org/tom/experimental1_2.zip zipfile.
Don't get time to test...

/!\ Caution: this code is to use with simplified programmer only ("scenix2 Version 0.1simple For use with simplified programmer only") be careful