The above video goes away if you are a member and logged in, so log in now!
I am having probs with the Independence Installer
I am having probs with the Independence Installer –
I am having problems getting the R3 and L3 triggers to work using the Independence Installer.I tried opening up the KL.DAT file and putting in this command for the L3 or R3 buttons it looks like this:
L3=mc0:/BADATA-SYSTEM/my .elf file I am using;then a name of the program
R3=mc0:/BADATA-SYSTEM/ I tried a .efl file here also and it didn't work
I tried it this way,but my L3 and R3 buttons don't seem to work when I press it.The app doesn't wanna launch or something and I am using the Keylaucher 0.3 exploit and the PS2 Independence Installer when building my disc.I use alot more programs than this to compile the disc,but I am really just trying to figure out what the command line is for the L3 or R3 buttons.It would be great if somebody could help me out.Thanks in advance
I can't figure it out,but is it possible to use the L3 or R3 buttons to boot an app.I am still searching very hard,but I still have had no luck on finding the answer.I tried numerous times trying to figure out the command used also for the R3 and L3 buttons.This is the same exploit that runs off the keylauncher exploits.Any help would be helpfull....
I figured out my own problem which is pretty simple.I just switched from using the KL.ELF file and plugged in the PS2Menu.elf file from the PS2Menu V2.66 release which fixed my problems using the R3 and L3 buttons my problems are all solved.