The above video goes away if you are a member and logged in, so log in now!
ps3 REBUG 4.46.01 DREX (DEX)firmware UPDATE LOOP (%20-24%) error 8002f147
ps3 REBUG 4.46.01 DREX (DEX)firmware UPDATE LOOP (%20-24%) error 8002f147 –
well I had installed Rebug 4.46.01 DREX on my ps3 in dex mode,. well then
one day I have problems with my second controller (gone crazy), so I decided to re- update my ps3 (with Rebug 4.46.01 DREX),
ok so I did, I didnt used a usb device, I used ps3 inner HDD to update, well. the sistem starts to update, until it goes to 24%, gives me this: error 8002f147, so I needed to restart my sistem, and I did,.
after that my ps3 starts to update again by itself. the update stucks at 24%(error 8002f147) again..,
hmm, after that i Thought there was a hdd write problem, so I formatted the ps3 inner hdd, and tryed again, but going to safe mode, .. there are 6 options in safe mode
.. I chosen ¨update system¨, the update starts, but it stops again, but on 20% (error 8002f147),.. I tried like 3 times, formatting the same hdd and reformatting, but It still get stuck at 20% (error 8002f147),..
do someone know the solution,? donwgrade could fix this issue? (using 3.55downgraderPUP) ? , or something else?
By the way, I just used my second controller in other ps3, and it worked flawlessly..
I had this problem a long time ago, I had to go out and buy an external tool in order to format my hdd using my computer, however after I put it back in the system, it gave me a black screen. If I recall, I had to restore the file system from the safe mode menu in order to get it to function correctly again. PLEASE NOTE: This is when I did it on a CEX system before I converted it to dex. I would verify with others before attempting this. I AM NOT RESPONSABLE FOR ANYTHING HAPPENING TO THE SYSTEM. The process was done because it was giving the red screen of death.
One other thing (I know you're going to have to format it using a pc at least.) You might want to look up the hdd replacement tutorial, that might give you some insight on how to do so.
I dont have a black screen, when my ps3 detects a formatted hdd, my ps3 re format it, and just attempts to install the ps3 firmware, and update just stops at 20%..,
when I reformat my hdd and try again, the same thing happens, I can access to safe mode every time I reformat my hdd, --- I tried the Restore System thing, and It gave me an error,
I have some other tests to do on my ps3 before I decide to flash it to 3.55 and do a Factory Service Mode install.. I have some Ideas, but I might be needing more
Last edited by shadowXtreme; 10-22-2013 at 05:47 PM.