true blue for downgraded ps3

Quote:

---

Originally Posted by ECubeFreak

So just to clarify.
My friends ps3 was orignally on 3.55 then he accidentally upgraded to 3.56.
I downgraded using e3 flasher.
Now if i install using the above steps then exit recovery menu i should be on True Blue firmware is this correct?

Cheers

---

Yes through "Recovery" not "Factory/ Service"

Edit: also from what I understand you could have downgraded straight to TBv2 CFW

i am very sorry guys i made mistake
i have this problem in recovery menu not in service mode

Quote:

---

Originally Posted by STALKER

i am very sorry guys i made mistake
i have this problem in recovery menu not in service mode

---

has it errored out or do you not proceed because it says "4.11 or greater"??

your SYSCON is set to 4.11 that is why these FWs have the "no check" patch, you should be able to proceed with no problem (I do recommend Toggle QA "Debug Updater" for brick prevention)

Quote:

---

Originally Posted by bitsbubba

has it errored out or do you not proceed because it says "4.11 or greater"??

your SYSCON is set to 4.11 that is why these FWs have the "no check" patch, you should be able to proceed with no problem (I do recommend Toggle QA "Debug Updater" for brick prevention)

---

it says "4.11 or greater"

ok man i realy need your help i am not very professional in this
but can u tell me step by step what should i do ?

Quote:

---

Originally Posted by STALKER

it says "4.11 or greater"

ok man i realy need your help i am not very professional in this
but can u tell me step by step what should i do ?

---

1) put TBv2 CFW on your USB @usb:/PS3/UPDATE (make sure update is named PS3UPDAT.PUP)
2) enter Recovery mode
3) select option 6
4) press Select+Start (NO MATTER WHAT VERSION FW IT SAYS YOU NEED)

It should update just fine as long as you have a "no check" patched FW (Rogero, TBv2)

guys i dont know what happened but now i am stuck on factory service mode
when i turn on ps3 , rogero logo appear then a red screen in the corner say "factory service mode"
plzz can u tell me how to get out from it ?
i have now regero cfw 3.55 spoofed to 3.70

Quote:

---

Originally Posted by STALKER

guys i dont know what happened but now i am stuck on factory service mode
when i turn on ps3 , rogero logo appear then a red screen in the corner say "factory service mode"
plzz can u tell me how to get out from it ?

---

you need lv2diag.self (file 2) from the 3.55 DGF pack put it on the root of your USB then turn on the PS3, in a few seconds the PS3 will turn back off, when you turn PS3 back on you'll be out of F/S mode

i read this comment in ps3hax websit
________________________
Downgraded PS3's CAN use TB CFW, and Cobra, or Kmeaw or any other firmware your console is able to install.
Here's how:

Once you have successfully downgraded (from say 3.70 with a hardware flasher) you will be on a lvl1 patched firmware with checks disabled, say Rogero v2 for example.

All you have to do is use rebug's Toggle QA pkg to enable QA on your console.

Then go into the QA menu (using button combo) and turn on update debug.
Load 3.41 or 3.55 OFW on your usb reboot your PS3 into recovery mode, and use the update option and update the firmware (actually downgrade).

In the recovery update menu it will ask for whatever the highest firmware your console was on (mine was 4.00) but will install 3.55 no problem.

This will reset the syscon to whatever firmware you are downgrading to (3.55 OFW for example)
.
Now install TB or Cobra cfw from the XMB.
__________________________________
is it work ?

yes

but what is (button combo) and where can i get update debug?