KADO True-Blue JB2 Patch for Downgraded consoles

[PatrickBatman]

I havent tested this personally as I don't need it but here you go:

Trueblue 3.56+ Downgrade patch for TrueBlue:
Download Tolong di coba.rar from Sendspace.com - send big files the easy way

How to use it:
If you attend to downgrade 3.56+ console and use TB dongle after that then use this steps:

1 - Dump your NOR flash using Progskeet first if you didn't have a good dump from your console.
2 - Download patch file attached to this thread.
3 - Extract this file and you will get 4 folders use patch in folder "Coba_2" to patch your dump using WinSkeet.
4 - Apply this patch to your dump then flash it to your console.
5 - Enter a Factory Service Mode using any method you like.
6 - Use TB CFW with Lv2diag.self to flash your TB CFW in FSM.
7 - Start your console normally, if it brick just dump this NOR flash again then patch again using "Coba_2" patch.
8 - If it still bricked use "Coba_3" patch to patch your dump again then flash it back to your console.
9 - Start console normally, now your console can run TB CFW on downgraded console.
10- Power off your console, plug your TB Dongle then power it on again and enjoy .

Credit goes to Kado for this patch

[majidorc]

downgrade 4 ??

[PatrickBatman]

People with FW 3.56 and above that use Progskeet to get back to FW3.55. Before TB wouldn't work with a system that was downgraded to 3.55. This patch should fix that problem.

(PS They mention Progskeet in the install notes, don't know if you can use e3 flasher etc, I have asked Abkarino‎ (Kado's brother) who I got this info from, will get back with update when he tells me).

EDIT: (got a response from him) "I think it work if you swaped your dump bytes since E3 dump RAW NOR without byte swapping it." -Abkarino (in regards to using E3 flasher instead of Progskeet)