The above video goes away if you are a member and logged in, so log in now!
Is this what I need for downgrade?
Is this what I need for downgrade? –
£105 all together. Added R4 because it comes with MicroSD card. That's everything I need for downgrade?
you dont need the r4 card but everything else is fine the e3 card reader is fine to get into fsm you dont need an old jailbreak dongle at all as the e3 card reader is used for that.
Originally Posted by jayfunk
Where the hell a DS game kart gotta do with anything LOL
you should be good
I fixed my brick recently with the E3 3k Limited flasher and the E3 Card reader. You will also need a micro-sdhc card, some arctic silver thermal paste to replace the paste on your CPU and RSX chips after opening up your system (about $10 USD) and if you have an old phat model you will need a soldering iron and some wire to connect the E3 linker board. The wire isn't needed if you have a slim PS3
What website is this because every were I look e3 flasher is out of stock or they look like one of them chink copys
Cause I read you need Micro SD card. R4 comes with SD card plus I have a DS.
Originally Posted by Goku1992
Originally Posted by nova89
Need thermal paste even though I have Slim?
Originally Posted by BahumatLord
You could try to get by without it as long as you don't wipe off the old paste when you open up your PS3 but you could run into overheating issues that would shorten the life of your PS3. You can find some cheap stuff for about 3 or 4 bucks at radio shack but I would get the silver paste for around 10 to 15 bucks. If you can afford it then I would highly suggest that you do it
It's your console. After doing it just keep an eye on the temperature for a couple weeks in multiMAN when you first turn it on, after an hour of gameplay, etc, etc. If it starts getting too high you'll need to open it back up. Personally I'd rather just do it right the first time and be done with it