The above video goes away if you are a member and logged in, so log in now!
after i get my dump and I check by Hex statistic show
18.23% [WARNING] - Patch & Recheck (Risky below 18.24)
and I also check by BwE_NOR_Validator
everything is green just one warning 18.23%.
this time I did tried two more time still get the same result.
then I tried to connect tristate to SBE on E3 clip but still get the same result.
now do I just continue to do it or just stop and tried different way to get a better dump my ps3 is 160gb CECH2501A can downgrade to 3.40
I have a question. I am on v4.31 and in you required tools section it states that a dev board isn't needed if you on firmware 4.40 0r below. do I need one and if not what do I do in the finishing the downgrade in service mode section? thanks for the tutorial by the way.
I have a simple question. How do you tell which NAND is the "Top one" and which one is the "Bottom one" I assume the NAND on top is the one thats on the same side as the CPU is right?
Never mind I figured it out.
NEED HELP So, I installed the E3 Flasher just fine, but when try to update the flasher with the mini SD card, no blue bar comes up. Also there is no signal going to my TV from the PS3, did I do something wrong? and am I now left with a brick?!?!?
I figured it out, however I am having a lot of trouble making the bkpps3.bin backup. FlowRebuilder keeps saying the operation completed with errors. I've checked everything overt and over again and can't find any reason as to why this isn't working The clip is set in there nice and snug, everything is installed right, I don't get what I'm doing wrong!
Last edited by BrandonEPrintis; 07-19-2013 at 12:02 AM.
awesome tutorial. thank you!!
Hi, I can't seem to find the thing (sorry I forgot what it was called) on the base of my ps3, I have ps3 slim.
So I'm interested in downgrading but I have one question:
Is it possible to downgrade from 4.46 (CECHHxx, so I know the model's okay) or am I just SOL for now? Thanks for the guide.
TEENSY++2.0 NANDway Guide
TEENSY++2.0 NANDway Guide –
The following errors occurred with your submission
You have included a total of 169 images in your message. The maximum number that you may include is 150. Please correct the problem and then continue again.
Images include use of smilies, the BB code [img] tag, and HTML <img> tags. The use of these is all subject to them being enabled by the administrator.
I have the same old issue again lol
i'm trying to add the updated nandway guide here and I will soon be updating the others.
also I just carnt figure out how to swap posts about so the guide looks the same as on hax
if you can shuffle them then please can you for me