|
|
|
|
Would you like to get all the new info from
PSX-Scene in your email each day?
Want to learn more about the team keeping you up to date with the latest scene news?
Read about them now! Check out our Developer bios, too! | ||
|
|
I just tried this on an 80gb Back Compatible with the geo 3.55fw and it was a success. Downgrading to 3.15 as we speak then up to 3.41 official.
Last edited by nicval; 01-14-2011 at 03:49 AM.
Files are all in the following RAR:
Multiupload.com - upload your files to multiple file hosting sites!
Requirement: Dongle flashed with PSGrade HEX (Downgrading Hex)MD5s:
PS355Downgrade.rar ead0a681bfd10bb1ed1da981d03421b6
PS3UPDAT.PUP 5c3b09c7fb0655d3f8852d3aad778025
\FILE1\Lv2diag.self 099f33a7967f99e91c07e870fd78b3db
\FILE2\Lv2diag.self 7a20bfdae65eefb47a4425db1b52dcde
Code:Instructions: (lifted from PSGroove with few modifications) DO NOT ATTEMPT TO DOWNGRADE A PS3 SLIM USING THIS METHOD! YOU WILL BRICK. (Note: Some have had success with Slims) I accept no responsibility for anything that may occur to your PS3 after following any of these directions. Do so at your own risk. This has been tested and works on a launch model PS3 Fat. I highly recommend you back up your flash to prevent loss of blu-ray playback. NOTE:: You must downgrade from 3.55 to 3.41 before downgrading to another firmware. 1) Fully power down the PS3 Fat (toggle the power switch) 2) Restore power to the PS3 Fat 3) Format a USB drive with the Fat32 filesystem 4) Copy the file from the "\FILE1" folder (Lv2diag.self) to the root of the USB drive 5) Copy PS3UPDAT.PUP to the root of the USB drive 6) Insert your payload device with PSGrade into the USB port closest to the Blu-Ray drive. Power on the PS3. 7) The PS3 should start up in service mode. Power it down with a controller. 8) Remove your payload device, and insert the USB drive into the same port. Power on the PS3 9) The PS3 will downgrade, and then automatically turn itself off. Nothing will appear on your TV. 10) Power your PS3 back on, and you should still be in service mode. From here, you can now downgrade to earlier firmwares. To return your PS3 to normal retail functions from Step 10: A) Shut down your PS3 using the controller. B) Repeat above steps 3-4 using the Lv2diag.self from the "\FILE2" folder instead. C) Repeat step 8 from above
Last edited by Enzomatrx; 01-13-2011 at 02:50 PM. Reason: Attached instructions as TXT file
PLEASE READ
ok some of you dont understand the downgrade bluray playback shit. so let me sort of explain in noob terms for you.
i see mention of Inception, Inception is MKB version 19 if you have played any other mkbv19 disc inception will not help you recover bluray it will HAVE to be that other disc! the ps3 updates the MKb version ONCE. also mkbv20 and 21 is out if you happened to play one of those your gonna have to play that to recover bluray.
ONLY phats with 256mb nand (cech a through to g/h consoles) loose bluray. NOT SLIMS or small nand consoles since the drls are stored on the hdd not the nand.
this info should be edited if you wish and added to the main page so people understand. please quote it so others can see it on eachm page befpre we end up with more "OH NOES i lost my bluray playback."
| « Previous Thread | Next Thread » |