I'm having some trouble with my progskeet 1.2. I'm hoping anyone here has a solution because i can't find much on the internet.
I have the progskeet programmed with the latest nand bitstream, connected the 3.3v from the progskeet to the nand pcb and i have the non-solder clip connected to the nand pcb.
However when i connect the progskeet to the pc with the clip connected to the nand pcb my pc will not recognize the progskeet, or if it does recognize it it will tell me the device can't boot.
When i remove the solderless clip cable from the nand pcb my pc will recognize the progskeet without a problem or any errors.
Does anyone know what is causing this, and how i can fix it?
hi, had same problem with my progskeet 1.2, how i sorted this was to inject the 3.3v to the ps3 board form a pc power supply and this sorted my problem.
good luck with yours.
I managed to get a little bit further. Windows 7 was causing the trouble with the driver which made it unable to function properly. Using a windows xp machine now and no more errors from windows.
I'm having a hard time getting the clip to make a proper connection though.. I've used cleaning alcohol, using clamps to make sure they stay on but i keep getting the "unknown" when i click auto instead of the samsung.. Anyone got some tips for that?
Edit: Could it be a power issue causing the unknown / gibberish to show up when i click auto? I checked the voltages sent out by the progskeet's 3.3v pads with a multimeter and it shows me it sends out 3.2v, which shouldn't be a problem, however when i connect the clip's cable to the nand pcb there is no power being sent through. And the slave board becomes very hot when the clip is connected to the nand pcb.
Would it work if i connect a 3v battery to the nand pcb and not use the progskeet to power it? I could just cut the wires i soldered to the progskeet and connect the 3.3v cable to the + side of the battery and the gnd cable to the - side right? (I'm not gonna solder on the battery, but i could put the cable on it and clamp it together i guess?