many thanks to judges for his awesome work.
i`ve successfully dumped the nor and also released the nor after dumping.
but my console wont boot anymore.
the led is green and 5 seconds later it will automatically shutdown.
the dump is looking good and file comparison between different dumps is also fine.
do we have to desolder the teensy after dumping ?
i missed something ?
how are you powering the teensy?
i haven`t soldered any vcc.
when i power on the ps3 with usb cable connected the console is running (green light) but no video output.
without usb cable connected the console shuts down immediately.
i`m pretty sure the nor isn`t fried because the dumps are looking good,
but something is blocking the nor to boot.
maybe it`s not really released or something like this.
my board is a jsd-001 and i used the diagram from norway hwinstall folder.
however in this picture it looks like judges has soldered vcc.
but i dont think this is related to my problem.
because dumping works like a charm.
someone an idea what maybe causing this boot problem ?
many thanks for your reply.
just disconnected the tristate pin (E7) on the teensy, but the ps3 still wont boot.
any other suggestions ?