The above video goes away if you are a member and logged in, so log in now!
How to dump NOR?
How to dump NOR? –
I have wired up my NOR console to a teensy++ 2.0, and I am not sure how to proceed.
In the guide it says to power up the PS3. What should I have connected to the motherboard? Everything or just the Power adapter. I don't want to mess anything up.
I can not help you with the Teensy++ as I used the E3 to do up my PS3.
Originally Posted by mecroflux
But during the dump and subsequent rewrite, you only need to have the Heatsink/Fan and Power in place, as well as the Power and Eject Buttons. Once you get to the point where you are installing CFW. Then you also need to have both the BR and HDD installed.But, before that you'll just have to verify that your Dump is both valid and safe to use. At which point you write your patched Firmware back to your PS3, and then start to close up your PS3 again. Just like in the Howtos...
What threw me at first was that after flashing my PS3 with my patched Firmware I was half expecting to see some change. I ended up reflashing my PS3 about Three times before I caught on that it was a "patched" Firmware, and that I needed to update to a 3.55CFW Downgrader.
I ended up using both..
Rogeros 3.55 Downgrader http://psx-scene.com/forums/content/...ack-3-55-3171/
And, Rogeros 3.55CFW v3.7 http://psx-scene.com/forums/content/...v3-7-psn-2648/
to allow me to update back to Habib 4.46CFW which I've been using for about a Month now.