Components needed to make progskeet solderless.

Can someone tell me what components ineed for the progskeet tomake it solderless? and does it require an injectus also...

i belive i need the PCB adaptor and the NAND clip, but i am not really sure, lol ;)
and will i nee the infectus to program the progskeet, which really makes no sense, but...

You need : Progskeet + 360-CLIP + ADAPTOR PCB PROGSKEET + injectus. The injectus to program the progskeet by bitstream to use it solderless. You can get more info in the official site of progskeet. BTW : The method is not 100% solderless.

Quote:

---

Originally Posted by faxtron

The method is not 100% solderless.

---

is it one, two or three wires that need soldered

Quote:

---

Originally Posted by bitsbubba

is it one, two or three wires that need soldered

---

You need to solderbridge ( R9 and R11) in the progskeet to enable 3.3V to achieve read/write the nand and if you have the PCB adapter you have to solder two cables from progskeet to PCB (3.3v and GND).You can get a full tutorial about this process in the ps3 dev wiki here : Progskeet - PS3 Development Wiki

Example :

Attachment 33986

Red = 3.3v
Black= GND

For the nor process I think is the same but using the nor clip.