what about the bluray?
what about the bluray?
PS GRADE is diy and it uses graf payload
random dongle_id generation to prevent Sony from blocking Factory Mode for the dongle_id 0xAAAA, together with the usb_dongle_master_key found by graf_chokolo.
I Downgraded it (3.55jb) geohotz with Custom firmware using Recovery Mode which was the only way. It installed, the screen went black and the stand by light was flashing red. when i would try to turn it back on, it goes green red yellow red and flashes. It's YLOD search it up on youtube, We could have bricked and caused it to YLOD at the same time. I'm not quite sure but i'm getting it fixed and checked out tommorow. Hopefully i'd atleast have 3.41 (3.56) on it after all this, so i can downgrade to 3.15 then back on to legit 3.41. If not i'm not going to keep it on geohotz 3.55jb wait for gaia backup manager to be signed so i can start playing my games again! I'll let you know what happens. I'm sure there might be a few out there experiencing the same problem. I need feedback !
alright i have a motorola droid phone and im using psfreedom will this work? i see you say to use the psgroove payload i dont know what to do with this part in psfreedom it lets you select a payload from 3.01 up to 3.41 so how do i jailbreak or service mode for 3.55 since thats what im on? so do i need to find this said payload?
I dont understand step 6 and payload device with PSGrade. What is this exactly? How use this? Can I use my USB flash?
Please, can anyone help me. Send PM
Ok so i found the hex file for PSFreedom but what do i do with it now so i can downgrade 3.55? send me a pm or reply here in need of some help i will wait as im not ignorant enough to brick my ps3...
(PS3 80 gb:ps3up:) i am on ofw 3.41 from 3.55...going to try going up again with update in system upate xmb and recovery from 3.55>3.56(3.41)..will be back in 30min
Ok i put the ps3key jig from ''PSGRADE - All Dongle Hex's - **UPDATED**'' and put it onto my ps3key.
I got my ps3 into factory service mode.
I put the modified 3.41 PUP into the root of my fat32 2gb usb stick. Together with the file1 lv2diag.self
I boot my ps3 (wich is in factory service mode) i shut it down with a controller.
Boot again with the usb in the most right port and it doesn't go to a black screen but just boots normally.
Only it is in factory service mode.
I try'd to get it out of factory service mode and it doesnt work. It stays in factory service mode.
I'm really stuck at this point. Help would be greatly appreciated.
ok but if I use PSGroove using my iPod it won't work on 3.55 to put it into recovery mode? So I can't use this method right? I'm on 3.41 OFW FAT right now and want to downgrade to 3.15