v12 power problem
Hi all, i have a v12 that fails to power up.
Power Led - Red turns Green then Red again.
Found out that Fuse (ps3) is blown.
Replace with old ps2 fuse ps3(63).
1st power up - everything looks fine.
2nd power up - Power Led Red turns Green then Red again. ps3 blown again. :banghead:
Changed 3 times. Still the same.
Is there any other solution.
Btw, i have check all the other fuse.
Thanx in advance.. :-pray:
look for some kind of short... the fuse dont blow because of nothing... if there is a modchip look for bad soldered wire........you should find it
try what andreq said, if no luck try to follow the circuit from ps3 fuse and look for resistors gone short circuit, if they are shorted they will allow full current through blowing your fuse.
No modchip installed..
Tracked ps3 fuse but didn't find any resistor connecting to it..
Really desperate now..
You never did anything to it but this happened?
well possibly it fell and something is mis allined..
it happen to me b4
the 202 component got screwed i replaced it if i dont remember with a fuse no, 50 or 63...
but that solved the problem
it near the point where u can take a 3,3v (check muppet chip diagrams to know where exactly) and that solved the problem
i did nothing to the set and it just happened...
it just Failed to turn on..
Could it be some other components?
Fuse tried but failed.. all other fuse is ok..
check ps14 again
on some consoles its fuse no. 50
on other 202 component
also remove any fixes u've installed / modchip