The above video goes away if you are a member and logged in, so log in now!
V12, DVD doesnt spin, wassup???
V12, DVD doesnt spin, wassup??? –
i got a V12 70002 PAL unmodded console, put a dvd in the drive, close the lid and nothing happens. it boots up to the system/browser screen when you turn it on ok but nothng happens when you close the lid with a dvd in there. it doesnt even spin at all, not even 10 degrees. its like its dead.
I have been told the laser has been removed and tried in another unit and it worked fine, so that probably rules out the laser being dead.
anyone got any ideas on what the problem might be?
I spent days trying to figure one out that was doing the same thing, check inside the lid and see if the little lug that presses down the switch on the power/reset button is still there mine was broken off and when you shut the lid it doesnt press the switch, if it is still there I would take the top off and check the laser is plugged in correctly and hold the 2 switches manually and see what happens.
everything looks ok, switches seem to work, close the lid and the laser moves back and forth but the disc just dont spin. anything else it could be?
ive put the whole drive/laser assembly into a known working unit and everything works ok, ive swapped the cables and still nothing works.
something is wrong with with the console itself as the laser/drive assembly and cables are fine, any ideas what?
check fuse ps13 with multi meeter no beep =dead best way is to replace it . if u want a quick fix brige the sucker..
You have dead laser or dead track/focus resistanse ( 683/303/01d) or PS 13 blow .
no, laser works fine. i just checked PS13 and its dead. anyone know what would cause that to blow?? i will replace it when i find another one somewhere. i dont really wanna bridge it when theres a possibility of 5 amps going through it.
PS13 is 0.4 A .
Dont pu bigger coz dont know why blow the existing fuse