V10 Mother Board Help

need to know the value of the resistor where the 3.3 volt connection is made on the v10 motherboard is

what does the resistor reads?
if it sess 305 or 3004 its 3000 000ohm =3Mohm
if it sess 304 or 3003 its 300 000ohm =300Kohm
if it sess 303 or 3002 its 30 000ohm =30Kohm
if it sess 302 or 3001 its 3 000ohm = 3Kohm
if it sess 301 or 3000 its 300ohm
if it sess 300 its 30ohm
If it sess 3R0 its 3ohm
If it sess 0R3 its 0,3ohm

need to know what to use to fix this on the 10 mother board thanx

anyone that can help me please i just need to know what to use to fix this the picture is above ^ to all to see thanx

thats an conductor... conductors are almost never marked with value.
And it can't be messured with standard multimeters.
I would guess it's 10 or 100 nF but guessing in this matter i not a god think to do..

what happend to it?

it broke when my modder guy was sodering to it and it broke off where it is circled in the picture above what do you think that he can use to fix that
thanx retro the help and the info :-)

what kind of chip were you trying to install? just so i can take a look at better installation pictures

retro it is the magic-5k6 for the v10 mother board thanx for the help :-)

i think i found a better pic. :)

If you cant get enybody to tell you the value, your best shot vould be to unsolder the conductor to the left of were it originally satt. (they look realy alike)
find someone to messure that one.
Check you phonebook for elektronic copanyes or whatever.

buy a new and put them both back.

ok will do that thanx alot retro for the help and info ill post back when he can fix it