-
Unmoded V9 (please)
hi all can some one please help me out on this one
.....lv got a unmoded V9 that will read games then just stop with in a few seconds...lv cleaned the laser 'took readings from the coils 5 / 5.5 and tryed to adjust the pots (with MULTIMETER)....Is it possible for the LA chip to blow and the laser to be ok on a unmoded ps2...big thanx
Gavin :-pray:
-
Not probable... Your LA is probably fine, otherwise it would not read anything. But your laser diode is probably either too weak or gets hot. I suggest to test the whole drive in another PS2 to see whether it works or not, if it does then it's your board, otherwise it's the laser itself that causes the problem.
regards, Stephen
pS: if the coils are ok, then your laser still may be bad, so meassuring the coils only will not help.