The above video goes away if you are a member and logged in, so log in now!
PS2 v9 laser assembly help please!
PS2 v9 laser assembly help please! –
My ps2 laser doesnt move. The laser worm spins, but the white tab slips past it.
I have tried bending it down, but it didnt help. Then i raised and looked at it and it's eaten away in the spot where it is supposed to touch the worn. There is an arc there basically in the spot it's supposed to touch. Does anybody know where i can get that part replaced? (The white tab and the metal part that screws on to the laser)
you can try richspsxparts.com
did you remove the laser to bend it down, if not it wouldnt have done anything, it would have just sprung back up, all of them have some arcing but still work.
try bending down with laser removed put back and make sure by moving by hand the laser moves back and forth freely and the grub screw isnt so tight as to stop it moving.
try this before ordering a new one and if it doesnt work, well no harm done.
i tried that, i lifted the actual thing up to see and it's eaten away in the stop where it is supposed to catch onto the snake motor. I have ordered the part, now i need to know how to remove the lens.