The above video goes away if you are a member and logged in, so log in now!
ps2 v9 disk wont spin –
ive just installed a matrix ifinity to a silver v9 also ive done the romeo mod.
all seemed well but it would not play dvds???checked the pots was getting 4.9ohms and 5.1 ive had this trouble b4 and had to replace la 6508chip and the laser.the ps2 was playing cdrs and the decided to stop spinning ive tried a diffrent laser but still no joy...sounds like the la chip again???????
any info would be great thanks mark
ps2 now no picture –
hi thanks for the reply i have two ps2 silver v9 i have just done the pro 6508 la mod and now theres no picture just blank no sound ethier?????
i also have a non modded v9 silver again same symptoms no picture could this be a fuse i hate these silver versions
oh help me please.......
Don't know if this help or not, but normally I removed all the cables from the DVD ROM and plug it back in and 90% it will work. But since you brought up the LA chip, I don't know too much about that topic.
v9 no picture –
ive tried putting in a diffrent drive still no luck.....
this station has just gone like this theres no modchip in this one???
thanks for your help
I got 2 console both model SCPH 50001, and they have the same symptom. Great!! When I pop the disc in, it makes couple of "click" sound and then spin very slowly. Not too long after that it finally come to stop. Again, 2 of my console behave this way, I have no clue where to start looking for the trouble. I hope someone here has an idea. Thanks.
How do you measure the LA chip to make sure that it still work? From reading someone's post in this forum, he said to measure the resistance on leg 18&19, and 20&21, I get about 20 - 40 ohms. Is that right? Any other methods? I have an analog multimeter..