The above video goes away if you are a member and logged in, so log in now!
Power Strip came undone. . .
Power Strip came undone. . . –
Hello all, I have a PS2 that I got off eBay and I have to keep changing the lens level so it can pick up the HDLOADER CD and the normal CDs, both of which are getting farther and farther apart. . . anyway, to the problem. . .
I had my PS2 on my window sill and I was trying to open my window and the lid slipped off and the little strip that was in between the 2 came undone. All in still intact, I just need to know where to enter that little strip, it's so thin that I cannot see where exactly to enter it.
I appreciate the help and hope to hear from somebody soon. Thank you.
Look for a tiny slot under the DVD drive..it will be the only ribbon cable port that doesnt have a cable in it.
do i have to unscrew the dvd drive to get it up and then slip it in, the problem is that i can't find it, i know what to do, i just don't know whether i have to take the drive out (and how to if i do need to) or if there is a way to just slip it in. this cable is really flimsy and i doubt i can just push it thru
no u can open also the groundplate of the ps2, so u can access the other side. you will find the ribbon connection directly under the position of the drive.
i am really not havin a good time with this thing, i went to unscrew the dvd drive, and unscrewed the wrong ones, then i went to look under it again and popped the white wires out lol, not a hard fix, but its the point, i am just makin it worse. r there any detailed pictures or instructions out there for this?
lol, nvm all, i finally got it, i just took out the screws for the controller ports and mem cards and then got under it, thnx sumone for the suggestion, i just couldn't figure out how to do it.