hey all i was putting magic mod chip in my ps2 and the reset light and eject light all works correct but i have no video whats so ever! so i removed the magic chip and still does the same thing! any help would be great!
Printable View
hey all i was putting magic mod chip in my ps2 and the reset light and eject light all works correct but i have no video whats so ever! so i removed the magic chip and still does the same thing! any help would be great!
Most likely you have solder points bridged probably on the bios or dvd controller points.
thanks for the fast reply i went over all that but i will check again
one other thing.... after i removed the mod chip it worked fine then i left to go on vacation and when i got back it was like this! you still think its a bridge?
thanks
no check for rodents... ;)
what version PS2?
rodents? sorry i am new to this i make alot of things and solder alot but very new to ps2 mods
thanks
you know rodents - PS2 ver 1-7 must have rodents V2 running around to work......
Also look for rodent pellets v3 & 4 - if they are absent rodent V2 will fail...
I had a rodent problem with my V7. I had to bring in a pro to fix the problem. The problem was that they were multiplying where they should not be. I think the pro that fixed mine goes by the username ORKINMAN.
That's some funny crap ShadowKnyght, but just so we don't totally mess up det1, I'll clarify...RODENT
haahahah that was funny!!!!! thanks for all the help but really any ideas or should i let the RODENTS eat it (hahahaahhehehehe)
my other ps2 works fine on all the hook ups
sorry.... it is a ver 7